Making a Call from the Phonebook
) When the phone is in standby, press [ 
] to open the phonebook.
2)Move the cursor to select DIAL/EDIT, and then press [select/
] or [ 
] again.
3)Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 22).
4)Press [
/flash] or [
] to dial the number.
Note: You can also press [ /flash] or [
] before you open the phonebook. When you come to the phone number you want to dial, press [select/
].
Chain Dialing from the Phonebook
You can use the phonebook entries to store a group of numbers (up to twenty digits) that you may need to enter once your call connects.
) Dial the number normally.
2)After the call connects, press [ 
].
3)Use [
] or [
] to select the phonebook entry that contains the digits you want to send.
4)Press [select/
].
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press [
] on the handset. To switch from a speakerphone call to a normal call, press [
].
Making a Call with Base Speed Dial
) When the phone is in standby, press [
].
2)Press [memory].
3)Press the number key ([0] through [9]) where the desired phone number is stored. The phone dials the programmed number.
28