Uniden TRU548 owner manual Connect the base unit, Handset is fully charged

Page 15

C. Connect the base unit
1	Connect the AC adapter to the DC IN 9V
	jack and to a standard 120V AC wall outlet.
2	Set the base on a desk or tabletop, and
	place the handset on the base unit as	The handset can be
	shown. Remove the beltclip, if attached,	placed up or face
	for face up charging. (See “Mounting the	down in the base for
	Base Unit on a Wall”, on page 11.)	charging.

3 Then raise the antenna to a vertical position.

4 Make sure that the status LED lights. If the LED does not light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

• Use only the supplied AD-313 AC adapter. Do not use any other AC adapter.

• Connect the AC adapter to a continuous power supply.

•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

•After installing the battery pack in the handset, charge your handset at least 15-20 hours before plugging into

the phone line. Once the handset battery pack is fully	Place the power cord
charged, connect the telephone line cord to the base and	so that it does not
telephone wall outlet.	create a trip hazard
5 Connect the telephone line cord to the TEL	or where it could
5 Connect the telephone line cord to the TEL	become chafed and
LINE jack and to a telephone outlet once	create a fire or
the handset is fully charged.	electrical hazard.
If your telephone outlet isn't modular, contact your telephone company
for assistance.
	G E T T I N G S TA R T E D [ 9 ]

GETTING STARTED

Image 15

Contents Page Page Page Unit for explanation purposes WelcomePage Contents Integrated Answering Device Controls and Functions 42 43 44 Read This First 7 to13 to Checking the Package Contents Choose the best location Setting Up the PhoneInstalling the Battery Pack Battery use time per charge Low Battery AlertCleaning the Battery Charging Contacts Handset is fully charged Connect the base unitChoose the dialing mode Setting the handset retainer clip for wall mounting Mounting the base unit on a wallStandard wall plate mounting Direct wall plate mounting Setting Caller ID Options/Language Entering Your Area Code Making and Receiving Calls From the handsetHandset On the Base Off the Base From the base Receiving Calls only TerminologyAdjusting the Volume Redialing a Call Redialing from Standby Mode From the HandsetRedial from Talk Mode Tone Dialing Switch-overTraveling Out-of-Range Selecting a Different ChannelTo locate the handset Flash and Call Waiting When speaking on the baseWhen speaking on the handset Way ConferencingWith the Handset Storing Phone Numbers and NamesMemory Dialing If you make a mistake while entering a name Steps for Entering Names and Special CharactersMemory Dialing Memory dialing from Standby Mode Making Calls with Memory DialingDisplay a Programmed Number Chain Dialing Memory dialing from Talk ModeEditing a Stored Name and/or Phone Number Memory01 Stored Memory Store Erasing a Stored Name and Phone Number When the Telephone Rings You must subscribe to Caller ID service to use this featureCaller ID Viewing the Caller ID Message List To the standby modeDeleting a Caller ID message When the pointer is at YesWhen the pointer is at No Deleting Information from the Caller ID ListDial edit Using the Caller ID ListLong Distance calls and Area Code Setting/Cancellation Calling a party from the Caller ID listYou can not store Storing Caller ID messages in Memory dialingCall Waiting Features Integrated Answering Device FeaturesSetting Up Your Answering System Setting the clockTurning the answering system on/off Choosing between the two outgoing messages Setting your greetingPreset Message Recording a personal outgoing message GreetingAnnounce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Using Your Answering System Playing your messagesRepeating a message Deleting all messages Skipping a messageDeleting a message Deleting an individual messageRecording a conversation Voice memoFrom the following chart Remote access away from homeTurn on the answering machine remotely Remote room monitorChanging the Digital Security Code Installing the Beltclip Headset InstallationTo attach the beltclip To remove the beltclip When the charging terminals become dirty MaintenanceWhen slightly dirty When very dirtySymptom TroubleshootingSymptom Suggestion Battery Information General InformationAC Adapter Information Range Telephone Line ProblemsTechnical Information FCC wants you to knowCordless Telephone Privacy More Than One Cordless TelephonePrecautions Installation Considerations K, L IndexMemo Memo Memo Please do not Return this Product to the Place of Purchase At Uniden, we’ll take care of youThank you for purchasing a Uniden Cordless Phone