Uniden TRU548 owner manual Remote access away from home, From the following chart

Remote access away from home

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, to record a new outgoing message, and to monitor sounds in the room.

1	Call your telephone number.
2	While the greeting message is played, press # and your PIN code within
	2 seconds.
	If the answering system is off, let it ring 10 times. The tone sounds.
3	Then, press # and your PIN code within 2 seconds.
	The answering system announces the time and day and the number of
4	messages stored in memory. Then the message playback automatically begins.
	You may continue to listen to your message, or you may select a command
	from the following chart.
	Command	Function

#then 1 Repeat a message

#then 2 Playing your messages

#then 3 Skipping a message

#then 4 Deleting a message

#then 5 Stop message playback

#then 6 Answering system on

#then 7 Voice memo record/stop (up to 4 minutes recording time)

#then 8 Greeting message record/stop

#then 9 Answer system off

# then * Room monitor

5 After all of your messages have played, or the playback time exceeds 4 minutes, you will hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.

•During the remote

operation, displays on the base.

•You must enter a command within 15 seconds of entering command waiting mode. Otherwise the answering system automatically hangs up and returns to standby.

•The system will only playback messages for four minutes and then it returns to command waiting mode. To continue playing your message, press # then 2 again within 15 seconds.

T H E I N T E G R A T E A N S W E R I N G D E V I

T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 45 ]

D C E