Uniden TRU548 owner manual Storing Phone Numbers and Names, With the Handset

• In memory dialing

operation, you must

press a key within 20

seconds or the phone

will return to standby.

If you return the

handset to the base,

the phone will return

Storing Phone Numbers and Names

Memory Dialing allows you to dial a number using just a few key presses. Your TRU548 stores up to 20 names/numbers in the handset.

With the Handset

1 Press and hold	until “Memory Store”	Memory Store
is displayed.		01
		02

2 Press • and ª or enter a two-digit number (01 - 20) to select the memory location where you would like to store the number.

to standby also.

• You have 20 seconds

after pressing

to enter the number

you wish to store.

Otherwise, an error

tone sounds.

3Press . The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.

If this screen appears, the selected memory location is already stored. Then you must either change the entry in this location, clear the entry in this location, or select “Go Back” to choose another location.

Store Name

Edit Memory07

Delete Memory07

Go Back

4 Use number keys, , , or to enter the name. The name cannot exceed 13 characters.

•See the “Steps for entering names and special characters” (See pages 24-25).

•Use and to move the cursor to the desired location.

•Use to delete characters as needed.

•Press and hold to delete all the characters.

•If a name is not required, go to step 5.

[ 22 ] M E M O RY D I A L I N G