Uniden TRU 8880 owner manual From the handset, From the Base Receiving calls only

Page 36

note

•To set "Autotalk", see page 22 or to set "Anykey Answer" see page 22.

•The handset microphone is located at the bottom of the handset (see "Controls and Functions" on page 4). Position yourself as near to the handset as possible and speak clearly.

•If the line is in use by another handset(s), "Line In Use" appears in the display of all registered handsets that are not in use.

•The base microphone is located under the base. Position yourself as near to the base as possible.

From the handset

 

From the Handset

 

 

 

 

Normal conversation

Hands-free conversation

 

 

 

 

Handset On the Cradle

 

 

Pick up the handset (AutoTalk is:

 

 

on) or pick up the handset and press

 

To answer a call

talk/flash (AutoTalk is: off).

 

Handset Off the Cradle

Handset Off the Cradle

 

 

Press speaker.

 

Press any number key, */tone/<, or

 

#/> (Any Key Answer), or press

 

 

talk/flash.

 

 

 

 

 

Handset Off the Cradle

Handset Off the Cradle

 

1) Press talk/flash.

1) Press speaker.

 

2) Listen for the dial tone.

2) Listen for the dial tone.

To make a call

3) Dial the number.

3) Dial the number.

 

OR

OR

 

Dial the number, and then press

Dial the number, and then press

 

talk/flash.

speaker.

 

 

 

To hang up

Press end or return the handset to the cradle (AutoStandby).

 

 

 

To enter a pause

When you dial the number in standby mode, press PAUSE soft key. P

within the dialing

appears in the display, which represents a pause.

sequence

 

 

 

 

 

From the Base (Receiving calls only)

1)Press speaker and begin speaking.

2)To hang up, press speaker.

[ 3 4 ] B A S I C S

w w w . u n i d e n . c o m

Image 36
Contents Series Owners Manual Page Contents Welcome Features Terminology Handset Antenna Play/stop P Find hs/intercom P Example of the standby mode display Display and IconsAnimation Displays Making a callStandby mode Talk modeSoft Key Function Setting up the Phone Do the following stepsInstall the rechargeable battery pack into the handset Connect the base unit Mounting the Base Unit on a Wall Standard wall plate mountingDirect wall mounting Connecting the Charger Expanding Your PhoneHandset Expandability Register the Handset Default Settings Main Menu OptionsSetting Menu Options Using the interfaceDirectLink Mode Using DirectLink ModeUsing Room/Baby Monitor Room/Baby MonitorHandset Setup Selecting a Ringer ToneDistinctive Ringer Setup PressVol/∨ to select On or Off Press the OK soft key. You will hear a confirmation toneSetting the AutoTalk Setting the Anykey AnswerSetting the True Banner Selecting a LanguageVol/ ∨ to choose English Français French, or Español SpanishAdjusting the LCD Contrast Press /vol/∧ or /vol/∨ to adjust the contrast LCD 10 levelsSetting the Key Touch Tone Menu and then the Contrast submenuSetting the Animation Screen Answering System SetupSetting a PIN Code Available screensSetting the Ring Time Setting the Record TimeSetting the Message Alert On or Off Turning the message alert tone off by pressing any keyTurning the message alert tone off from a remote location Setting the Language of your Answering System Setting the Call ScreenFrench, or Español Spanish Global Setup Setting Day and TimeSetting Cidcw Caller ID on Call Waiting Setting the Area CodeOK soft key. You will hear a confirmation tone Setting the Dial Mode Then the Dial Mode submenu Initial setting is Tone Press /vol/ ∧ or /vol/ ∨ to select Tone or PulseDe-register the Handset Making and Receiving Calls 6CNMFrom the handset From the Base Receiving calls onlyPress speaker and begin speaking To hang up, press speaker Call Waiting Placing a Call on HoldRedialing a Call Deleting a Redial RecordStoring a Redial Record Adjusting the Ringer, and Earpiece and Speaker Volume Ringer volumeEarpiece and Speaker Volume Muting the Ringer Do Not Disturb DNDTemporarily Muting the Ringer Tone Dialing Switch-over Mute MicrophoneWith the handset With the basePrivacy Mode Works only when the phone is in useVol/ ∨ to move the pointer to Privacy Mode and then Travelling Out of RangeConferencing Way ConferencingVol/∧ or /vol/∨ Press the Store soft key, Store/Edit Name appearsChain Dialing Steps for Entering Names and Special Characters If you make a mistake while entering a nameFor example, to enter Movies Viewing the Phonebook Press /vol/ ∧ Vol/ ∨ , or the number keypad toMaking Calls Using the Phonebook From Standby ModeFrom Talk Mode Speed DialingVol/∨ to move the pointer to Copying Phonebook Locations If you select All Memories, Are you sure? appears onOr the number key 2-9and 0 to select the phonebook Location you want to export and then press the CopyCaller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID List Press cidDeleting a Caller ID Message Deleting Information from the Caller ID ListVol/∨ to choose Yes Using the Caller ID Message List Deleting all Caller ID names/numbersCalling a party from the Caller ID list Press /vol/∧ or /vol/∨ to choose YesTalk mode Storing Caller ID messages in the PhonebookCall Waiting Deluxe Features %QPHGTGPEG &TQR.CUVFeatures Integrated Telephone Answering DeviceAnswering System Default Settings Turning the Answering System On/OffSetting up your Answering System Answering System Settings Setting the Time Press set to select the hourSetting a PIN code Setting the ring timeAnnounce only feature Selecting the message record timeSetting the message alert Turning the message alert tone off by pressing any keySelecting the language Call screenScreening a call From the handsetFrom the base Using your Answering System When the phone is in standby mode, press play/stopPlaying your messages Repeating a message Skipping a messageDeleting a message Voice memoRecording a conversation Remote access away from home Remote OperationFunction Remote access with the handset Remote Key Function †/5Multi-Handset Features Using the DirectLink ModeDirectLink call Intercom/Call Transfer Feature IntercomFrom handset to handset or handset to the base Standby mode, press intcom/holdCall Transfer Feature From the base to a handsetFrom handset to handset or to the base From the base to a handset Installing the Beltclip Headset InstallationChanging the Digital Security Code To attach the beltclipBattery replacement and handling Power FailureLow battery alert Cleaning the battery charging contactsBattery Information General InformationAC Adapter Information Troubleshooting Symptom SuggestionSevere noise interference Symptom Suggestion Liquid Damage Case ActionPrecautions Installation Considerations Terminal Equipment Memory List Memo Index G, HRemote access away from home Remote Operation CardTask Main Menu Flow Chart From standby modeI N M E N U F L O W C H a R T 9 Please do not Return this Product to the Place of Purchase Page Register Online Today