Screening a call
From the base
To screen an incoming call, do the steps as follows:
1) After the answering system answers, the base speaker will let you hear the calls as the machine records the message. To adjust the volume, press 
/volume/
or 
/volume/ 
. If you set the answering system to off, you cannot screen a call.
To mute the Call Screen, press play/stop when the system is answering.
2)To answer the call, press speaker or pick up the handset from the base (when AutoTalk is set to on). The answering system will disconnect automatically.
From the handset
1) Press the SCREEN soft key when the system is answering.
To mute the Call Screen, press the MUTE soft key when the system is answering.
2)To answer the call, press talk/flash, speaker or any number key, */tone/← , or #/→ (when Any Key Answer is set to on).
To cancel the call screen, press end. The answering system will disconnect automatically.
note 
•If you set the call screen to off, you can not screen a call.
•If you press talk/ flash, call screen will be cancelled and the handset is put in talk mode.
•If you press the SCREEN
soft key while another handset is screening a call, you will hear a beep and you can not screen a call.
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
w w w . u n i d e n . c o m | T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 6 5 ] |