Uniden TRU 8880 Changing the Digital Security Code, Installing the Beltclip, Headset Installation

note

If the battery pack is completely drained, the handset will not beep when paging.

Changing the Digital Security Code

The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code:

1.De-register all the handsets you have (see “De-register the handset“ on page 32).

2.Register the handsets by following step 2-3 in “Registering the handset“ on page 15.

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip

Pull either side of the beltclip to release the tabs from the holes.

Headset Installation

Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations.

(Headset may be purchased by calling the Uniden Parts Department or visiting the web site. See page 81.)

[ 7 8 ] A D D I T I O N A L I N F O R M A T I O N w w w . u n i d e n . c o m