Uniden TRU 246 U N T I N G T H E B a S E U N I T O N a W a L L, Standard wall plate mounting

Page 11

M O U N T I N G T H E B A S E U N I T O N A W A L L

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate. 1

1 Snap the wall mount adapter into the notches on the base.

2 Plug the telephone line cord to the TEL LINE jack and the AC	2 - 7

adapter to the DC IN 9V jack.

3 Plug the telephone line cord into the telephone outlet.

4 Wrap the AC adapter cord inside the molded wiring channel. Then wrap the cord around the strain relief notch.

5 Plug the AC adapter into a standard 120V AC wall outlet.

6 Raise the antenna to a vertical position.

7 Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.

8On the base unit, pull the handset retainer out of the slot.

Rotate it clockwise 180 degrees.

8, 9

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place.

G E T T I N G S T A R T E D

If you have wall mounted the base, you cannot place the handset with the keypad facing inside.

(See page 38.)

G E T T I N G S T A R T E D

[ 9 ]

Image 11

Contents N E R ’ S M a N U a L N T E N T S Page N T R O L S a N D F U N C T I O N S N T R O L S a N D F U N C T I O N S Handset About the digital security code A D T H I S F I R S T6 to Base unit 11 toE C K I N G T H E P a C K a G E C O N T E N T S Choose the best location T T I N G U P T H E B a S E U N I TConnect the base unit If you aren’t sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Standard wall plate mounting U N T I N G T H E B a S E U N I T O N a W a L LDirect wall plate mounting E P a R I N G T H E B a T T E R Y P a C K Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsEarpiece volume Ringer tone and volumeDialing from standby K I N G a C a L LOther Operations Dialing from talk modeFrom the handset AutoTalk when ringingAny key answer when ringing C E I V I N G a C a L LRedial from standby D I a L I N G a C a L LA V E L I N G O U T O F R a N G E Redial from talk modeO R I N G P H O N E N U M B E R S a N D N a M E S L E P H O N E F E a T U R E S Display a Programmed Number K I N G C a L L S W I T H M E M O R Y D I a L I N GMemory dialing from standby A I N D I a L I N G Memory dialing from talk modeL E P H O N E F E a T U R E S Program name Program number Display a Programmed NumberA S I N G a S T O R E D N a M E a N D P H O N E N U M B E R To locate the handset G I N GL L E R I D Setting Caller ID optionsYou must subscribe to Caller ID service to use this feature To change your Caller ID options E N T H E T E L E P H O N E R I N G S E W I N G T H E C a L L E R I D M E S S a G E L I S T Deleting a Caller ID message When the pointer is at YesWhen the pointer is at No Deleting all Caller ID names/numbers Dial edit Long Distance call and Area Code settingI N G T H E C a L L E R I D L I S T Calling a party from the Caller ID listStoring Caller ID messages in Memory dialing L L E R I D F E a T U R E S Selecting an Option L L W a I T I N G F E a T U R E SD I T I O N a L I N F O R M a T I O N A N G I N G T H E D I G I T a L S E C U R I T Y codeTo attach the beltclip To remove the beltclip L T C L I P InstallationA D S E T Installation I N T E N a N C E Battery replacement and handlingT E O N P O W E R S O U R C E S Suggestion TroubleshootingSymptom Caller ID does not display Severe noise interference V, W, X, Y, Z D EJ, K, L M O M O At Uniden, we’ll take care of you UCZZ01703BZ