Using Caller ID, Call Waiting, and Redial Lists
If you subscribe to Caller ID service from your phone company, your phone will show you the caller’s phone number and name (if available) whenever a call comes in. If you subscribe to Caller ID on Call Waiting, the phone will also show you the name and the number of any call that comes in while you’re on the line.
Using the Caller ID List
You can store up to thirty Caller ID numbers in each station. Caller ID records are stored from newest to oldest. Once your Caller ID list is full, the oldest record will be automatically deleted when a new call is received.
To open the Caller ID list, press [
] (on the right side of the 
] and [
] to scroll through the list. (New records have an asterisk next to the received time.)
Making a Call from a Caller ID Record
) With the phone in standby, press [
] to open the Caller ID list.
2)Use [
] and [
] to find the Caller ID record you want to dial.
3)If you need to add (or delete) a “1” to the beginning of the displayed phone number, press [*/tone].
4)Press [
/flash] or [
] on the handset or [
] on the base to dial the number.
Note: You can also press [ /flash] or [
] on the handset or [
] on the base before you open the caller ID list. Find the phone number you want to dial, and then press [menu/select].
What’s this “add or delete a 1” about?
• Any phone number in the Caller ID records might (or might not!) have a “1” at the front, depending on how different phone companies send the Caller ID information.
•The phone dials the number exactly as it appears in the Caller ID record.
•If the phone number is a long distance or toll call, but the Caller ID record does not have a “1” in front of the number, press [*/tone] to add it. If the phone number is a local or
32
Using Caller ID, Call Waiting, and Redial Lists