Uniden TRU9585 manual Finding a Lost Handset, Using Hold, Conference and Transfer, Conferencing

Finding a Lost Handset

To locate a misplaced handset, press [int’com] on the base when the phone is in standby. Use [] or [] to select the handset you want to page, and then press [menu/select]. Select ALL to page all registered handsets.. To cancel paging, press [int’com] on the base again.

a Lost Handset Conference and Transfer

Using Hold, Conference and Transfer

Placing a Call on Hold

) During a call, press [clear/int’com] on the handset or [int’com] on the base to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold.

2)To return to the party on hold, press [ /flash] or [] on the handset or [] on the base. The phone will return to the holding party.

Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be disconnected and the phone will return to standby.

• While a call is on hold, Caller ID and Call Waiting cannot be received.

Finding Using Hold,

Conferencing

If you have more than one handset, up to four people can participate in a conference call. A four-way conference call consists of an outside line, two handsets, and the base speakerphone. You can easily join a call already in progress.

) Press [ /flash] or [] on the handset or [] on the base to join the call.

2)To hang up, return the handset to the cradle or press [ ] on the handset or [] on the base. The other party will still be connected to the call.

Outside call

Handset #2

Handset #1 Base speakerphone

37