Uniden UH-050XR manual Group Scan GS Mode

Note:

1.If SCAN is deactivated while in an active channel, the UH-050XR will stay on that active channel. If no other channels are active, the UH-050XR will reinstate the starting channel.

2.Pressing [OS/GS] will switch to Group Scanning.

2. Group Scan (GS) Mode

Allows you to monitor a Priority Channel while scanning.

To use GS Mode Scanning, press the [OS/GS] key. GS icon appears on the display.

GS Scanning checks the Priority channel activity regularly.

OS/GS

If the Priority channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority scanning continues after 3 seconds.

If scanning stops on a channel which is not a Priority Channel UH-050XR will continue monitoring the Priority Channel for activity while listening to the active one.

To deactivate SCAN, press the [SCAN] or [PTT].

Note:

OS/GS

1. If SCAN is deactivated while it is tuned to

DUP	LOCK
an active channel, the UH-050XR will

stay on that active channel. If none of the channels are active, the UH- 050XR will reinstate the Priority channel.

2.If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone will be heard and scanning will not start.

3.Pressing [OS/GS] will switch to Open Scanning.

11