Uniden UH-050XR manual Getting Started, Attaching the Antenna, Charging the Battery Pack

Page 7

GETTING STARTED

ATTACHING THE ANTENNA

Attach the antenna to the UH-050XRfollowing direction as indicated below. Be sure the antenna is firmly seated.

ATTACHING THE BATTERY PACK

1.Slide the battery pack onto the bottom of the radio.

2.Use a coin to turn the screw that connects the battery pack to the UH-050XR. Be sure the battery pack fits tightly against the UH-050XRbody.

OS/GS

DUPLOCK

UH0-50XR

CHARGING THE BATTERY PACK

Your UHF CB radio is powered by a specially designed nickel-cadmium battery pack.

Before operating the UH-050XR, charge the battery pack for 15 hours using the ac adaptor provided in this package.

AC-Power

Outlet

4

Image 7

Contents Operating Guide NICKEL-CADMIUM Battery Pack Warning Contents Introduction FeaturesAustralia Technical Support and ServiceIncluded in Your UH-050XR Package Getting Started Charging the Battery PackAttaching the Antenna When charging, the CHG icon appears on the display Battery Charge IndicatorSelecting Channel Power ON/OFFVolume OperationSquelch TX appears on the LCD To Transmit and ReceiveUsing a Repeater Channel Scanning To Operate UH-050XR in Duplex ModeGroup Scan GS Mode Priority Channel DROP-OUT DelayProgramming Scan Channels To use monitor Power SaveBattery Level Display UHF Channels & Frequencies Optional AccessoriesReceiver SpecificationsGeneral TransmitterCharger Australian One Year Warranty WarrantyUniden UH-050XR UHF CB Radio Controls & Indicators OS/GS