Uniden UH-050XR manual Priority Channel, DROP-OUT Delay, Programming Scan Channels

Programming Scan Channels

1.Select which Scanning Mode you wish to use on the channel

OS or GS Mode

Note: OS is indicated by the absence of the GS icon

2.Select the channel you want to store by pressing [▲] or [▼]

3.Press and hold [MEM] for 1.5 secs. to store. MEM icon appears and two successive beeps are heard.

4.To remove the channel from Memory, press and hold [MEM] for 1.5 secs. once more. Two successive beeps are heard and the MEM icon disappears.

OS/GS

DUPLOCK

OS/GS

DUPLOCK

PRIORITY CHANNEL

The Priority Channel feature allows user to monitor one of 40 channels in the UH-050XR, monitoring it every 1.5secs during Group Scanning.

Choosing a Priority Channel

The starting channel, when Group Scanning is initiated, is always the Priority Channel. To change the priority channel setting while scanning, (eg. PRI Channel is CH17 (476.825 MHz))

a.press [▲], to select a higher channel (scanning pauses)

or

b. press [▼], to select a lower channel

DROP-OUT DELAY

While scanning, the UH-050XRstops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for 3 seconds for the return of the signal, otherwise, the radio resumes scanning.

12