Philips XL375 Set the date and time format, What is standby mode?, Check the signal strength

Page 14

4

5

Press the numeric buttons to enter the time.

•If the time is in 12-hour format, press / to select [AM] or [PM].

Press [OK] to confirm.

Set the date and time format

1 Press MENU.

2 Select [CLOCK & ALARM] > [SET FORMAT], then press [OK] to confirm.

3 Select [DATE FORMAT] or [TIME FORMAT].

4 Select the setting. Select [DD/MM] or [MM/DD] as the date display and [12 HOURS] or [24 HOURS] as the time display. Then press [OK] to confirm.

»» The setting is saved.

What is standby mode?

Your phone is in standby mode when it is idle. The standby screen displays the handset name, handset number, date and time, signal icon, and battery icon.

Check the signal strength

It displays the link status between the handset and base station. The more bars are shown, the better the signal strength is.

•Ensure the handset is linked to the base station before you make or receive calls and carry out the phone functions and features.

•If you hear warning tones when you are on the phone, the handset is almost out of battery or the handset is out of range. Charge the battery or move the handset nearer to the base station.

14EN

Image 14

Contents Register your product and get support at EC Declaration of Conformity Contents Alarm clock Keypad lock Locate the handset Set the answer mode Announcements Incoming messages ICMVoltages, as defined in the standard EN 60950 Power requirementsDeclaration of conformity To avoid damage or malfunctionCompliance with EMF Disposal of your old product and batteriesEnglish What is in the box Congratulations on your purchase and welcome to PhilipsGuarantee Quick start guide Overview of the phoneOverview of the base station Display icons Connect the base station Install the handsetGet started »» The handset starts charging Check the battery levelBattery icon displays the current battery level Set the date and time format What is standby mode?Check the signal strength Calls Make a callAnswer a call Adjust the earpiece volumeEnd a call Mute the microphoneEnglish Make a conference call Make a call to another handsetTransfer a call During the conference call Press to end the conference callText and numbers Enter text and numberPhonebook Edit a record Direct access memoryEdit the direct access memory Delete a recordCall log Redial a call Redial listView the redial records Delete all redial recordsPersonalize the phone display Personalize the soundsAuto hang up Call featuresDial mode Auto conferenceSelect the recall duration Manage the area codeAuto prefix Activate auto removal of the area codeFirst ring ECO modeSelect ON/OFF, press OK to confirm »» The setting is saved Turn the first ring on/off 1 Press MenuSet the alarm Extra featuresAlarm clock Turn off the alarm When the alarm ringsLock the keypad Keypad lockLocate the handset Press and hold in standby mode. »» The keypad is lockedManual registration Register the handsetsAuto registration Network type Set the answering machine language Set the answer modeTurn on/off the answering machine Through the baseAnnouncements Record an announcementIncoming messages ICM Call screening Set the ring delayRemote access Set the sound quality of the messageRemote access commands Activate/deactivate the remote accessAccess the answering machine remotely Repeat the current or listen toRing delay Rings Speaker volume Level Default settingsReceiver volume Volume Language Country dependent Handset nameTechnical data DisplayFrequently asked questions Directive 1999/5/CE 1999/5/ECRichtlijn 1999/5/EG Som framgår av direktiv 1999/5/EG0168