Philips XL375, XL370 End a call, Answer a call, Adjust the earpiece volume, Mute the microphone

Page 16

End a call

You can end a call in these ways:

•Press ; or

•Place the handset to the base station or charging cradle.

Answer a call

When the phone rings, press to answer the call.

Note

•• The caller ID service is available if you have registered to the caller ID service with your service provider.

Tip

•• When there is a missed call, the handset displays a notification message.

Turn off the ringer for all incoming calls

There are two ways to turn off the ringer:

1 Press and hold in standby mode. »» displays on the screen.

2 When the phone rings, press .

Adjust the earpiece volume

Press or to adjust the volume during a call.

The earpiece volume is adjusted and the phone is back to the call screen.

Mute the microphone

1 Press during a call.

»» The handset displays [MUTE ON].

»» The caller cannot hear you, but you can still hear his voice.

2 Press again to unmute the microphone. »» You can now communicate with the

caller.

Turn the speaker on or off

Press .

Make a second call

Note

•• This service is network dependent.

1 Press R during a call, then press [OK] to confirm.

»» The first call is put on hold.

2 Dial the second number.

»» The number displayed on the screen is dialed out.

16EN

Image 16

Contents Register your product and get support at EC Declaration of Conformity Contents Alarm clock Keypad lock Locate the handset Set the answer mode Announcements Incoming messages ICMPower requirements Declaration of conformityVoltages, as defined in the standard EN 60950 To avoid damage or malfunctionCompliance with EMF Disposal of your old product and batteriesEnglish What is in the box Congratulations on your purchase and welcome to PhilipsGuarantee Quick start guide Overview of the phoneOverview of the base station Display icons Get started Install the handsetConnect the base station Battery icon displays the current battery level Check the battery level»» The handset starts charging Check the signal strength What is standby mode?Set the date and time format Calls Make a callAdjust the earpiece volume End a callAnswer a call Mute the microphoneEnglish Transfer a call Make a call to another handsetMake a conference call During the conference call Press to end the conference callText and numbers Enter text and numberPhonebook Direct access memory Edit the direct access memoryEdit a record Delete a recordCall log Redial list View the redial recordsRedial a call Delete all redial recordsPersonalize the phone display Personalize the soundsCall features Dial modeAuto hang up Auto conferenceManage the area code Auto prefixSelect the recall duration Activate auto removal of the area codeECO mode Select ON/OFF, press OK to confirm »» The setting is savedFirst ring Turn the first ring on/off 1 Press MenuExtra features Alarm clockSet the alarm Turn off the alarm When the alarm ringsKeypad lock Locate the handsetLock the keypad Press and hold in standby mode. »» The keypad is lockedAuto registration Register the handsetsManual registration Network type Set the answer mode Turn on/off the answering machineSet the answering machine language Through the baseAnnouncements Record an announcementIncoming messages ICM Set the ring delay Remote accessCall screening Set the sound quality of the messageActivate/deactivate the remote access Access the answering machine remotelyRemote access commands Repeat the current or listen toDefault settings Receiver volume VolumeRing delay Rings Speaker volume Level Language Country dependent Handset nameTechnical data DisplayFrequently asked questions 1999/5/EC Richtlijn 1999/5/EGDirective 1999/5/CE Som framgår av direktiv 1999/5/EG0168