Philips XL375, XL370 Call screening, Set the sound quality of the message, Set the ring delay

Page 36

3 Press [OK] to confirm.

»» All old messages are permanently deleted.

Note

•• You can delete the read messages only. No deleted messages can be recovered.

Call screening

You can hear the caller while he is leaving a message. Press to pick up the call.

From the base

Press / to adjust the speaker volume during call screening. The lowest volume level turns off the call screening.

Set the sound quality of the message

You can adjust the sound quality of the messages received from the answering machine.

1 Press MENU.

2 Select [ANSWER MACHINE] > [SETTINGS] > [MSG QUALITY], then press [OK] to confirm.

3 Select the new setting, then press [OK]

to confirm.

»» The setting is saved.

Set the ring delay

You can set the number of times the phone rings before the answering machine picks up the call.

1 Press MENU.

2 Select [ANSWER MACHINE] > [SETTINGS] > [RING DELAY], then press [OK] to confirm.

3 Select a new setting, then press [OK] to

confirm.

»» The setting is saved.

Note

•• Ensure that the answering machine is switched on before this feature can be applied.

Tip

•• When you access the answering machine remotely, you are recommended to set the ring delay to [ECONOMY] mode. This is a cost effective way to manage your messages. When there are new messages, the answering machine picks up the call after 3 rings; When there is no messages, it picks up the call after 5 rings.

Remote access

You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your 4-digit PIN code.

Note

•• The remote access PIN code is the same as your system PIN. The preset PIN is 0000.

Change the PIN code 1 Press MENU.

2 Select [ANSWER MACHINE] > [SETTINGS] > [REMOTE ACCESS] > [CHANGE PIN], then press [OK] to

confirm.

3 Enter the old PIN, then press [OK] to confirm.

4 Enter the new PIN code, then press [OK] to confirm.

5 Enter the new PIN code again, then press [OK] to confirm.

»» The setting is saved.

36EN

Image 36
Contents Register your product and get support at EC Declaration of Conformity Contents Alarm clock Keypad lock Locate the handset Set the answer mode Announcements Incoming messages ICMPower requirements Declaration of conformityVoltages, as defined in the standard EN 60950 To avoid damage or malfunctionCompliance with EMF Disposal of your old product and batteriesEnglish What is in the box Congratulations on your purchase and welcome to PhilipsGuarantee Quick start guide Overview of the phoneOverview of the base station Display icons Install the handset Get startedConnect the base station Check the battery level Battery icon displays the current battery level»» The handset starts charging What is standby mode? Check the signal strengthSet the date and time format Calls Make a callAdjust the earpiece volume End a callAnswer a call Mute the microphoneEnglish Make a call to another handset Transfer a callMake a conference call During the conference call Press to end the conference callText and numbers Enter text and numberPhonebook Direct access memory Edit the direct access memoryEdit a record Delete a recordCall log Redial list View the redial recordsRedial a call Delete all redial recordsPersonalize the phone display Personalize the soundsCall features Dial modeAuto hang up Auto conferenceManage the area code Auto prefixSelect the recall duration Activate auto removal of the area codeECO mode Select ON/OFF, press OK to confirm »» The setting is savedFirst ring Turn the first ring on/off 1 Press MenuExtra features Alarm clockSet the alarm Turn off the alarm When the alarm ringsKeypad lock Locate the handsetLock the keypad Press and hold in standby mode. »» The keypad is lockedRegister the handsets Auto registrationManual registration Network type Set the answer mode Turn on/off the answering machineSet the answering machine language Through the baseAnnouncements Record an announcementIncoming messages ICM Set the ring delay Remote accessCall screening Set the sound quality of the messageActivate/deactivate the remote access Access the answering machine remotelyRemote access commands Repeat the current or listen toDefault settings Receiver volume VolumeRing delay Rings Speaker volume Level Language Country dependent Handset nameTechnical data DisplayFrequently asked questions 1999/5/EC Richtlijn 1999/5/EGDirective 1999/5/CE Som framgår av direktiv 1999/5/EG0168