General Radio Operation
Universal Connector Cover
The universal connector cover is located on the antenna side of the radio. It is used to connect certain accessories to the radio.
Note: To prevent damage to the connector, shield it with the connector cover when not in use.
Remove the Connector Cover
1 Insert a
2Hold the top of the cover with your thumb while you pry the
bottom of the cover away from the radio with the screwdriver.
Attach the Connector Cover
1Insert the hooked end of the cover into the top of the connector. Press downward on the cover’s top to seat it into the slot.
2Press the cover’s lower tab below the connector until it snaps in place.
Top
Hooked End Slot
Tab
Bottom
Slot
12