Jensen VM9114 Switching to Radio Tuner Source, Selecting FM/AM Band, Seek Tuning, Manual Tuning

VM9114

Switching to Radio Tuner Source

•Touch the top left corner of the screen to view the SOURCE MENU. Touch “Radio”.

•Press the SRC button (10) on the front panel or remote control (8) to switch to the AM/FM or RADIO source.

Selecting FM/AM Band

Touch the BAND button (15) on the screen to change between the following bands: FM1, FM2, FM3, AM1, and AM2.

NOTE: The BAND button on the unit only works when the TFT is closed.

Seek Tuning

To seek the next higher station, touch the button on screen. To seek the next lower station, touch the button on screen.

Manual Tuning

To increase or decrease the tuning frequency one step, touch the or buttons on screen.

Direct Tuning

To enter a radio station directly, touch the button to display the direct entry menu.

FM: _ _ _ . _ MHz

1 2 3

Exit

4 5 6

7 8 9

Enter

0 Clear

Enter the desired radio station using the on-screen number pad. Press the Enter button to tune to the selected station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear.

17