Jensen VM9114 operating instructions Error Messages, Care and Maintenance

				VM9114
		Table 6: Troubleshooting
Problem		Cause		Corrective Action
Interruption		Disc is dirty or scratched	Clean disc or replace
occurred dur-
		File is damaged/bad	Recreate disc with good files
ing playback
		recording
Error Messages
		Table 7: Error Messages
Message		Cause		Corrective Action
Displayed
Loading	Disc is being read
No Disc	Disc is dirty			Clean disc with soft cloth
	Disc is upside down			Insert disc with label side up
	Disc not present in loading			Insert disc
	compartment
Bad Disc	Disc is dirty			Clean disc with soft cloth
	Disc is upside down			Insert disc with label side up
Unknown	Disc format is not compatible
disc	with this unit
Region Error	DVD is not compatible with
	region code of unit
Error	Illegal mechanism operation			Press EJECT key for 5 seconds to
				reset loading mechanism

Care and Maintenance

1.Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non-neutral detergent (such as alco- hol) may result in scratching or discoloration.

2.Do not get water or cleaning fluids on the unit.

3.If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again.

4.Never insert anything other than a 5” (12 cm) compact disc into the player as the mechanism can be damaged by foreign objects.

5.Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or without an adaptor, as damage to the player and/or disc may occur. Such damage is not covered by the Warranty on this product.

36