VM9114
Table 6: Troubleshooting
Problem | Cause | Corrective Action |
|
|
|
|
|
|
Prolonged | Improper aspect ratio | Use correct aspect ratio setting |
image or | setup |
|
improper |
|
|
height/width |
|
|
ratio display |
|
|
Monitor stops | Moving path is blocked | Press OPEN key to restart monitor |
at incorrect |
| movement |
position |
|
|
TUNER |
|
|
Weak station | Auto antenna is not fully | Connect the auto antenna control cable |
searching | extended | properly |
| Auto antenna not properly | Connect the auto antenna control cable |
| connected | properly |
| LOCAL function is acti- | Turn LOCAL function off |
| vated |
|
DISC |
|
|
Cannot insert | Disc already inside unit | Eject current disc and insert new one |
disc |
|
|
Image blurred, | Disc is illegally copied | Use original disc |
distorted, or |
|
|
dark |
|
|
Disc does not | Disc is warped or | Use disc in good condition |
play back | scratched |
|
| Disc is dirty or wet | Clean disc with soft cloth |
|
|
|
| Laser pickup is dirty | Clean laser pickup with cleaning disc |
| Incompatible disc is used | Use compatible disc |
|
|
|
| Disc rating exceeds | Change Parental Lock settings to lower |
| Parental Lock rating limit | restriction |
| Disc region code is not | Use disc with proper region code |
| compatible with unit |
|
| Disc is inserted upside | Insert disc with label side up |
| down |
|
PBC cannot be | PCB is not available on |
|
used during | the disc |
|
VCD playback |
|
|
No repeat or | PCB is on | Turn PCB off |
searching |
|
|
while playing |
|
|
VCD |
|
|
MP3 |
|
|
35