Jensen VM9114 operating instructions Using Preset Stations, Auto Store/Preview Scan AS/PS

VM9114

Using Preset Stations

Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen.

Storing a Station

1.Select a band (if needed), then select a station.

2.Touch the on-screen MEM button (18) to open the preset screen.

Preset: _

P1 P2 P3

P4 P5 P6

E x i t

3.Touch the preset number in which you would like to store the current station (or touch Exit to cancel and close the menu). The preset number and station appears highlighted.

Recalling a Station

1.Select a band (if needed).

2.Touch an on-screen preset button (6) to select the corresponding stored station.

P1 87.5 MHz

P2 90.1 MHz

P3 98.1 MHz

P4 106.1MHz

P5 107.9MHz

P6 102.9MHz

Auto Store/Preview Scan (AS/PS)

Auto Store (AS)

To select six strong stations and store them in the current band:

1.Select a band (if needed).

2.Touch the AS button (16) on page 2/2 of the on-screen controls to activate the Auto Store function.

The new stations replace stations already stored in that band.

Preview Scan (PS)

To scan the AM or FM band for a preview of available stations in your particular area, touch the PS button (20). Touch again to stop preview scan.

18