Bryston CSERIES manual Sst C-Series, 7B SST C-SERIES

7B SST C–SERIES

The 7B SST single-channel amplifier employs a balanced-output design that reduces THD and IMD to unprecedented low values (typically 0.001% or less). With a low noise floor (typically below -118dB) and excellent signal tracking characteristics (slew rate of 120 Volts per microsecond), the 7B SST monoblock assures a new degree of transparency, musicality, and ease of listening. Capable of delivering a truly prodigious 600 Watts continuously into 8 Ohms, and with tremendous power reserves, the 7B SST offers virtually perfect freedom from overload on any type of speaker or music.

Single-channel (mono-block) amplifier

600W into 8 Ohms

900W into 4 Ohms

SST C–SERIES

The 7B SST is also available in a special version for very low impedance loads, i.e., 2 Ohms and below.

One advantage of the 7B SST’s Monoblock design is that it allows you to place the amplifier adjacent to the loudspeaker, providing improved perfor- mance through lower cable resistance.

The 14B SST is also available in a special 120 Volt 20 Amp version (requires a dedicated 20 Amp AC outlet).

Dual-channel (stereo) amplifier

600W into 8 Ohms

900W into 4 Ohms

14B SST C–SERIES

Probably the best value “esoteric” high power 2-channel amplifier on the market today, the 14B SST is basically a pair of 7B SST amplifiers on a single compact chassis. Its superbly low noise floor yields an inky black silence between notes for hauntingly realistic reproduction. As a dual mono modular design, it has the power to drive, with breath-taking ease and clarity, speakers which have been considered “impossible” loads in the past.

5