Mounting
Orientation
Rigging
Before mounting the product, read and follow the safety recommendations in the Safety Notes section.
The Intimidator™ Wash Zoom 250 IRC can be mounted in any position, but make sure the placement allows adequate ventilation for the product, and allows for movement of the yoke and head in any direction.
Be sure to place the product in a location that allows easy access to it for maintenance and programming, and enough space around the product for ventilation.
Make sure that the structure or surface onto which the product will be mounted can support the product’s weight. For more information see the Technical Specifications section.
When mounting the product overhead, always use a safety cable and make sure the product is attached securely.
When mounting the product on a truss or pipe, use a mounting clamp with the appropriate weight capacity. CHAUVET® has a full range of mounting clamps. See
The rubber feet serve as floor supports. When placing the product on the floor, make sure that the product and cables are away from people and vehicles.
Mounting Clamp |
| |
(such as | Safety Cable | |
|
| (such as |
|
| CHAUVET®) |
|
| |
Threaded Mounting Hole |
|
|
| Secure the safety cable | |
size M12 on bottom panel |
| |
| using the | |
|
| the bottom of the product |
|
| |
|
|
|
Mounting
Diagram
Fan and Ventilation Slots | Handles on |
(ensure adequate space for | both sides |
ventilation) |
|
Page 10 of 29 | Intimidator™ Wash Zoom 250 IRC User Manual Rev. 1 |
