5.TECHNICAL INFORMATION
Product
Maintenance
Dust
To maintain optimum performance and minimal wear in a normal environment, clean the product at least twice a month. If the environment is particularly dusty, clean the product more often.
For best results follow the suggestions listed below:
·Never clean the product when it is plugged into a power source.
·Only clean the product when it is at room temperature.
·Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surfaces and in the vents.
·Use a mild soap solution,
·Apply the cleaning solution directly to a soft,
·Gently wipe dirt and grime to the outside edges of the external optics and glass or transparent surfaces.
·Gently polish the external optics and glass or transparent surfaces until they are free of haze and lint.
Always dry the external optics and glass/transparent surfaces carefully after cleaning them.
Do not spin the cooling fans while blowing compressed air into them.
Page 26 of 29 | Intimidator™ Wash Zoom 250 IRC User Manual Rev. 1 |