Product at a
Glance
Use on Dimmer
Outdoor Use
DMX
Master/Slave
x
x
P
P
P
Auto Programs | P |
|
|
P | |
|
|
Replaceable Fuse | P |
|
|
x | |
|
|
|
|
Safety Notes | These notes include important information about the mounting, use, and maintenance of |
| this product. Read these notes before using the product. |
|
|
| · Always connect the product to a grounded circuit to avoid the risk of electrocution. |
| · Make sure the power cord is not crimped or damaged. |
| · Always disconnect the product from the power source before cleaning it or replacing |
| the fuse. |
| · Never disconnect the product from the power source by pulling or tugging on the |
| cord. |
| · If mounting the product overhead, always secure it using a safety cable. |
| · Make sure there are no flammable materials close to the product when it is |
| operating. |
| · Avoid direct eye exposure to the light source while the product is on. |
| · Do not touch the product’s housing when the product is operating because the |
| housing can be very hot. |
|
|
|
|
| · This product is not intended for permanent installation. |
| · The product is for indoor use only! It is rated at IP20. |
| · To prevent risk of fire or shock, do not expose the product to rain or moisture. |
| · Always make sure that the voltage of the power source to which the product is |
| connected is within the range stated on the sticker or rear panel of the product. |
| · Never connect the product to a dimmer or rheostat. |
| · Make sure to replace the fuse with another of the same type and rating. |
| · Always install the product in a location with adequate ventilation, and leave at least |
| 20 in (50 cm) between the product and adjacent surfaces. |
| · Always use the handles to carry this product. |
| · The maximum ambient temperature (Ta) in which the product can be used is |
| 104 °F (40 °C). Do not operate the product at higher temperatures. |
| · Be sure that no ventilation slots on the product’s housing are blocked. |
| · Never carry the product by the power cord or any moving part. |
| · In the event of a serious operating problem, stop using the product immediately. |
| · Never try to repair the product. Repairs carried out by unskilled people can lead to |
| damage or malfunction. Contact the nearest authorized technical assistance center. |
|
|
|
|
| Keep this User Manual for future reference. If you sell the product to another user, be |
| sure to give this manual to the next owner. |
|
|
Intimidator™ Wash Zoom 250 IRC User Manual Rev. 1 | Page 5 of 29 |
