SERVICE AND ADJUSTMENTS
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
Depress ciutcWbrake pedal fully and set parking brake.
Place gearshift lever in neutral (N) position.
•Place attachment clutch in "DISENGAGED" position. , Turn ignition key "OFF" and remove key.
= Make sure the blades and all moving parts have completely stopped.
-Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
TRACTOR
TO REMOVE MOWER (See Fig. 19)
Mower will be easier to remove from the right side of tractor.
•Place attachment clutch in "DISENGAGED" position.
•Move attachment lift lever forward to lower mower to its lowest position.
•Roll belt off engine pulley.
,Disconnect clutch rod from clutch lever by removing retainer spring.
LEVER
RETAINER
SPRING
SUSPENSIONPULLEY
®Disconnect
°Disconnect suspension arms from rear deck brackets by removing retainer springs.
=Disconnect front links from deck by removing retainer springs,
Raise lift lever to raise suspension arms. Slide mower out from under tractor.
IMPORTANT: | IF AN ATTACHMENT | OTHER THAN THE |
MOWER IS TO BE MOUNTED TO THE TRACTOR,
REMOVE THE FRONT LINKS.
RETAINER
SPRING
RETAINER
SPRINGS
BOTH SIDES
RETAINER
TO iNSTALL MOWER (See Fig. 19)
®Raise attachment lift lever to its highest position.
•Slide mower under tractor with discharge guard to right side of tractor.
-Lower lift lever to its lowest position.
•Install mower in reverse order of removal instructions.
SPRINGS
(BOTH SIDES)
FIG. 19
2O
