Sears 917.259567 Checklist, iNSTALL MULCHER PLATE See Figs. 5, To Convert To Bagging Or

Models: 917.259567

1 56
Download 56 pages 20.36 Kb
Page 9
Image 9
iNSTALL MULCHER PLATE (See Figs. 5 & 6)

GAUGE WHEEL

MOUNTING

BRACKET

_ _

\\

 

318-16\

LOCKNUT\

318" WASHER

SHOULDERBOLT

GAUGE WHEEL"

FiG. 4

iNSTALL MULCHER PLATE (See Figs. 5 & 6)

Install two latch hooks to mulcher plate using screw, washer, lock washer, and weld nut as shown.

NOTE: Pre-assemble weld nut to latch hook by inserting weld nut from the top with hook pointing down.

Tighten hardware securely.

Raise and hold deflector shield in upright position.

Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

Hook front latch into hole on front of mower deck. Hook rear latch into hole on back of mower deck.

CAUTION: Do not remove discharge

guard from mower. Raise and hold guard when attaching mulcher plate and allow it to rest on plate while in operation.

WELD NUT FROM THE TOP HOOK POINTS DOWN

LOCK

WELD WASHER

\

NUT.SCREW

BLY

TO CONVERT TO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

\

LATCH

HOOKS

FIG. 6

,/CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE

THE BESTPERFORMANCEAND SA TISFACTtON FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

,/ Al! assembly instructions have been completed.

,/ No remaining loose parts in carton.

,/ Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

,z Seat is adjusted comfortably and tightened securely.

,/ All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

,/ Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

,z Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

,/ Check wiring. See that all connections are still secure and wires are properly clamped.

LATCH

LOCK

HOOK

WELD

NUT

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

,/. Engine oil is at properlevel.

-

¢" Fuel tank is filled with fresh, clean, regular unleaded gasoline.

WASHER

WASHER

,/ Become familiar with all controls - their location and function. Operate them before you start the engine.

,/ Be sure brake system is in safe operating condition.

MULCHER

PLATE

FIG. 5

Page 9
Image 9
Sears 917.259567 owner manual Checklist, iNSTALL MULCHER PLATE See Figs. 5, To Convert To Bagging Or, Discharging