CUSTOMER | ;IBILITIES | ||
MAINTENANCE | SCHEDULE |
| |
FILL iN DATES |
|
| |
AS YOU | COMPLETE |
|
|
REGULAR | SERVICE |
| _ERVICE DATES |
Check Brake Operation | i | ||
Check Tire Pressure |
| ||
T Check for Loose | Fasteners | i/ | |
AR | Sharpen!Replace |
| Mower Blades | v' | i/ | |||
C | Lubrication | Chart |
|
| ||||
|
|
|
| |||||
T | Check | Battery | Level/Recharge | i/ | i/ | |||
0 | Clean | Battery | and | Terminals | ||||
a | Check | Transaxle | Cooling | !/ |
| |||
| Adjust | Blade | Belt(s) | Tension |
|
| ||
| Adjust Motion Drive Belt(s) Tension |
|
| |||||
| Check | Engine | Oil | Level | v' |
| ||
| Change | Engine | Oil |
|
| i/ | ||
E | CIean | Air Filter |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
N | clean | Air Screen |
|
|
| i/ | ||
G | inspect | Muffler/Spark | Arrester |
| ||||
I | Replace Oil Filter (It equipped) |
|
| |||||
_ EngineClean | Cooling |
Replace Spark Plug
Replace Air Filter Paper Cartridge
i/ i/
|
|
| Replace | Fuel | Filter |
|
| ! | , |
|
| Iv'l |
|
|
|
| ||
1 | more | often | when | operating | under | a heavy | load or in high ambient | temperatures. | 5 | - | If equipped | with adjustable | system. |
| ||||
2 | - Service | more | often | when | operating | in dirty | or dusty conditions. |
| 6 | - | Not required | if equipped | with | battery. | ||||
3 | - | If equipped with oil filter, | change oil | every | 50 hours. |
|
| 7 | - Tighten | front | axle pivot bolt | to 35 ft,qbs, maximum. | ||||||
4 | - | Replace blades more often when mowing | in sandy | soil. |
|
|
| Do not | overtighten. |
|
|
| ||||||
GENERAL RECOMMENDATIONS
LUBRICATION CHART
The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain tractor as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your tractor.
All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.
Once a year you should replace the spark plug, dean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper
(_)
BEARING ZERK
©
CLUTCH
PIVOT(S)
"FRONT WHEEL (_)
BEARING ZERK
ENGINE (_
BEFORE EACH USE
oCheck engine oil level. * Check brake operation.
-Check tire pressure.
-Check for loose fasteners.
®
PIVOTS
(_) SAE 30 OR 10W30 MOTOR OIL
(_) GENERAL PURPOSE GREASE
G)REFER TO CUSTOMER RESPONSIBILtT_ES "ENGINE" SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI- CANTS WiLL ATTRACT DUST AND DiRT THAT WILL SHORTEN
THE LIFE OF THE
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-
15 DERED GRAPHITE TYPE LUBRICANT SPARINGLY.
