Panasonic RX-D10, D11 operating instructions Presetting radio broadcasts, Listening, Press Memory

1

2

3

4

5

Presetting radio broadcasts

1 3 5 7 2 4 6

•Up to twelve FM and AM stations each can be programmed.

•If broadcast frequencies are preset in the memory, you can easily

tune in any of these frequencies.

• You can preset just those stations you like.

1	Set [		] to “TUNER”.
	Press [BAND] to select “FM” or “AM”.
2
	Every time you press the button: FM ↔			AM
	Press [MEMORY].
3
	“	” and the frequency flash.
	While “		” and the frequency are flashing:
4
	Press	[–/g] or [f/+] to		select the desired

station.

“ ” lights when an FM stereo program is being received.

Reference

You can select the desired broadcast by using “Automatic tuning”. (See page 9.)

5	Press [MEMORY].
	“	” and the preset channel number flash.
	While “		” and the preset channel number are
6
	flashing:
	Press [–/g] or [f/+] to select the preset channel.
	Press [MEMORY].
7
	If the “		” indicator goes off during programming, return to

step 3.

Repeat steps 3 to 7 to program other stations.

RX-D11 only

When using the remote control

Preparation: Set [ ] to “TUNER”.

1.Press [BAND] to select “FM” or “AM”.

2.Press [MEMORY/PGM].

3.While “ ” and the frequency are flashing:

Press [–/g] or [f/+] to select the desired station.

4. Press [MEMORY/PGM].

5. While “ ” and the preset channel number are flashing: Press [3] or [4] to select the preset channel.

6. Press [MEMORY/PGM].

Repeat steps 2 to 6 to program other stations.

Preset channel

Listening

6

7

7

RQT5210