Panasonic PV-D4762 operating instructions Index Search, Program End Search

Tape Operation

Search System

For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings.

Index Search

	INDEX	SEARCH
1ENTER INDEX		NUMBER :1
USING	1 -9 KEYS
FORWARD SEARCH :FF
REVERSE	SEARCH :REW
NEXT	:SEARCH/ M/A
EXIT	:STOP

Press SEARCH/ M/A SKIP*

to display SEARCH in Stop or Play mode, and then

Program End Search

Locates end point of recording for continuity.

1	twice
Press SEARCH/ M/A SKIP
to display SEARCH in Stop or Play
mode.

		press NUMBER
		keys
		to select	recording
		number.
		• To calculate
		number,	see below.
		Press FF/SLOW+
		or REW/SLOW-		on
		the remote to start
		search.
2	INDEX SEARCH	Play begins at
		search end.
		To search	forward
		or back 1 index,			or
	REVERSE SEARCH : REW	press FF/SLOW+
	FORWARD SEARCH : FF
		REW/SLOW-		on the
		remote while
		screen left is
		displayed	(10	sec.).
		• To cancel,		press
		PLAY	or STOP .

To Calculate Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

1 2 3 4 5 6 7

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

1	2		3	4		5		6	7
NOTE:		indicates	start	points	of each		recording.

Note

•If Index Search is started very close to an index mark, that index mark may not be counted in the search.

2	PROGRAM END SEARCH		Press FF/SLOW+
			on the remote to
			start PROGRAM
	SEARCH START : FF		END SEARCH.
	EXIT :SEARCH		• To cancel,	press
			PLAY or	STOP .
Examples of		Program End Search		.

Fig. 1

Program 1 INDEX Program 2 or BLANK

the current tape position
Press SEARCH button	End Point

FF

Fig. 2
INDEX	Program 1	BLANK	INDEX	Program	2	BLANK
		the current tape position
		Press SEARCH button				End Point
			FF
Fig. 3
	the current tape position
	Press SEARCH button
INDEX	Program 1	BLANK				Program 2

		If	search exceeds
	FF
End Point		a	few seconds in
		BLANK area.

Upon locating end point,

➛search continues 7 sec. past end point,

➛tape rewinds to 10 sec. before end point,

➛tape plays to end point and stops.

Note

•If Program End Search is started very close to an index mark, that mark may be skipped over.

34 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com