Panasonic PV-D4762 Before Requesting Service, Power Correction, Recording & Playback Correction

Before Requesting Service

Check the following points if you are having trouble with your DECK.

Power				Correction
No power…				•	Completely insert Power Plug into an AC outlet.
				• Set POWER button to on.
				•	Make sure power source is active.
Power	turns itself off...			•	Auto power-off (shutoff) occurs after about 5 min.
					in DVD mode with no operation, or if there is no
					broadcast signal in TV or Playback mode.
					Turn the power back on. (pp. 23, 37)
Recording & Playback				Correction
TV program cannot be			recorded...	•	Check connections between DECK, external
					antenna, and TV.
				•	Check channel selections.
				•	Make sure your antenna system (CABLE or TV) is
					correctly set. (Channels [p. 18])
				•	Make sure cassette record tab is intact. (p. 6)
Timer	recording cannot		be	•	Confirm that clock is set to current time and date.
performed…				•	Make sure Cable/DSS box (if used) is left on and
					tuned to channel to be recorded.
				•	Set recording start/stop times correctly. (p. 24)
				•	Timer recording may not be performed or continued
					if a power interruption occurs before or during a
					Timer Recording, even after power is restored.
There is no playback picture, or the				•	Select channel 3 or 4 on TV to match VCR output
playback picture is noisy or contains					channel (3 or 4) (p. 16) or select LINE.
streaks...				•	Set VCR/TV selector to “VCR.”
				•	Adjust TRACKING control in either direction. (p. 6)
				•	Try Head Cleaning. (p. 6)
Special effects playback, picture may				• Set TV’s Vertical Hold Control to MANUAL, then
					adjust.
contain some vertical jitter when using
a TV with an Automatic Vertical Hold
Control...
DECK	cannot be	controlled...		•	Make sure DECK power is on.
				•	Check Remote batteries.
				•	Make sure VCR LOCK is set to off. (p. 37)
				•	Make sure Remote is in proper mode.(p. 28)
				•	Make sure Timer Recording is not in progress.
Remote Control				Correction
DECK	cannot be	remote controlled...		•	Make sure DECK power is on.
				• Make sure Remote is in VCR mode.
				• Aim Remote Control directly at remote sensor on DECK. (p. 9)
				• Avoid any object blocking signal path.
				•	Check Remote batteries. (p. 4)
				•	Exposing DECK remote sensor to direct fluorescent
					or outdoor light may cause signal interference.
PROG	buttons do not		respond...	•	PROG functions are not available in COMPONENT
					Video Output and S-VIDEO OUT. Set TV to either RF
					IN or VIDEO IN. (p. 10)
				•	Check Remote batteries. (p. 4)
				•	Press VCR or DVD button for DVD/VCR mode. (p. 28)

54 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com