Panasonic SV-SR100 operating instructions For Europe, the U.S.A, and Canada, For other areas

Page 2

RQT6457

WARNING:

TO REDUCE THE RISK OF FIRE, ELEC- TRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

For Europe, the U.S.A, and Canada

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

For other areas

THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.:

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable pro- tection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is con- nected.

Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause un- desired operation.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION!

DO NOT INSTALL, OR PLACE THIS UNIT,

IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. EN- SURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CUR- TAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

DO NOT OBSTRUCT THE UNIT’S VENTI-

LATION OPENINGS WITH NEWSPA- PERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.

DO NOT PLACE SOURCES OF NAKED

FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.

DISPOSE OF BATTERIES IN AN ENVI-

RONMENTALLY FRIENDLY MANNER.

Marking sign is located on bottom of the unit.

For areas except Europe, the U.S.A. and Canada

Make sure the voltage of the AC adaptor suits your local voltage before plugging it into the household AC outlet . If it doesn't, use a flat-headed screwdriver to set the VOLTAGE ADJUSTOR to the voltage corresponding to your area.

If the power supply in your area is 115 V or 120 V, please set the VOLTAGE ADJUSTOR as follows: For 115 V: set to 110 V

For 120 V: set to 127 V

VOLTAGE

ADJUSTOR

110V

 

 

110V

 

 

127V

 

220V-240V

 

 

 

 

 

 

 

OFF

 

 

 

 

 

Image 2
Contents Operating Instructions Dear customerFor Europe, the U.S.A, and Canada For other areasTable of contents Supplied accessoriesMaintenance SafetyInstallation ServiceSelection Listening cautionSelection and care of batteries CareGetting Control guideStarted Display panelUsing dry cell batteries Not included Power supplyUsing the AC adaptor Using rechargeable batteries Not includedScms Recording and playing on this unitCD and SD card information Inserting CDs and SD cards Playing CDs and SD cards Boosting the bass Other ways of playing CDs and SD cardsPlay modes Direct playRecording Press REC Pause to enter the recording standby modeRecording from a CD to an SD card Main unit only Confirm that REC OK appears, then press 1/, CDRecording a track that is playing Recording modesTrack marks Recording selected tracksTo pause recording Recording from a microphone and other equipmentLine MIC Connect the other equipment while the unit is stoppedOther ways of recording Manual track markingTitling SD cards FORMAT? Erasing tracks Formatting SD cardsAnti-Skip System Skip ON/OFF?Changing the display Adjusting the contrast DisplayConvenient functions Operation tonesReference Using the unit with other equipmentSpecifications NotDISPLAY NotPLAY NotSUPPORT Now Busy DisplaysF15 U01Maintenance User memo Only for U.S.APanasonic Consumer Electronics Company Product Service Product informationExcept for U.S.A. and Canada Panasonic Canada Inc