2Press the forward button (14) or backward button (15) to change the setting by 1 zone per step.
3Press the snooze button (7) to enable (or disable) the daylight saving function.
When daylight saving is enabled the 
symbol will become solid.
4Press mode button (8) once to return to the auto run mode with the current setting confirmed or if no key is pressed for 15 seconds, the unit will return to the auto run mode automatically with the current setting confirmed as valid.
Note:
(a)Please refer to page 11 (reference 2) for the details between city names and abbreviations.
(b)For the detailed 24 hour world time zone, please refer to page 11 (reference 3).
When alarm is active
1When any alarm is activated the buzzer or radio, press the snooze button (7) and the buzzer/radio will be turned off temporarily for approximately 9 minutes and the 1
and/or 2
symbol will flash. (The duration of the snooze function is 59 minutes).
2To disable the alarm for at least 24 hours press alarm button (9). (The alarm button can also disable the snooze function).
Note:
(a)When the sleep mode, alarm 1, alarm 2 collides the latest has priority.
(b)As the alarm is activated, the sleep mode, if set, is terminated immediately.
(c)If set to radio alarm ensure that your desired programme will be transmitted at the alarm time.
Wake to pillow speaker
1Set the desired alarm time as mentioned.
2Plug in the pillow speaker (3) into the jack at the back of the clock. Buzzer or radio will sound to wake you at the preset time. Press the snooze button on the pillow speaker or the main unit until the alarm is disabled.
3To turn the pillow speaker (3) off, slide the function switch (4) to the ‘off’ position
or press the alarm set/off button (9).
8