iHome iHM4 IB Not Charge iPOD, Battery Installation Top Panel, Strap, Using the iHM4, Maintenance

	Headphone Jack	Power Button
		Headphone Jack
Battery Installation	Top Panel
NOTE: THIS UNIT DOES
NOT CHARGE iPOD
		Strap
Use correct insert for all iPod
iPhone and MP3 players
	NOTE: ADJUST iPod VOLUME
nano is docked with the screen	TO AVOID DISTORTION
	Listen To Audio Device
facing the clear window

Using the iHM4

Thank you for purchasing the iHM4. Designed to work with your iPod, iPhone or other MP3 player or audio device, this system provides high quality audio that invites your music to come out and play. Please read the instructions carefully before operating the unit and keep for future reference.

Installing/Replacing Batteries

1.Open the battery compartment door located inside on the bottom of the unit.

2.Insert 4 “AAA” (R3) batteries, checking that the + and – ends of the batteries match the drawing outside the battery compartment.

3.Close the compartment cover.

For Best Performance

•We recommend the use of alkaline batteries for longer life.

•Do not mix old and new batteries.

•Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.

•Make sure you dispose of batteries properly (see your local regulations).

Listening to an iPod, iPhone or other MP3 player/ audio device

1.Unzip the iHM4. Plug the end of the built-in audio patchcord into the headphone or Line-out Jack on your device.

For nano: Place the included nano insert into the dock. With your nano connected to the audio plug, place the nano into the insert with the nano screen facing the clear window. For extra support, place the remaining insert in the dock on top of the nano insert.Pull the elastic retaining strap until the nano is firmly in place against the clear window, then secure using the velcro fastener.

For iPod/other devices: With your iPod connected to the audio plug, place your iPod in the dock facing the clear window. Place the iPod insert into the dock behind the iPod. Secure the insert and iPod in place with the retaining strap.

2.Turn on your iPod, iPhone, MP3 player or other audio device, press Play and set desired volume on the device.

3.Press the Power Button located on the top of the unit to ON. To listen to sound privately, connect headphone(s) to the headphone jacks. Doing so will cut off the speakers.

4.Remember to turn unit OFF when not in use to save batteries, and to turn off your iPod, too.

NOTE: Connected iPhones create audio interference noise when a call is received. Turn on Airplane mode to disable phone while playing music.

Maintenance

•Place the unit away from sources of direct sunlight or excessive heat.

•Protect your furniture when placing your unit on a natural wood and lacquered finish.

•Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can mar the surface.