AT&T 555-230-894 manual Power Up Switch, Install Translation Flash-Memory Card

Activate the System

Compatibility (EMC) wrist strap (comcode 900 698 226) when handling circuit packs or other switch components.

Power Up Switch

To power up the switch, do the following:

Install Translation Flash-Memory Card

1.Verify the write switch on the white Translation Flash-Memory Card (Translation Card) shipped with the system is positioned so the card can be written. The write switch is shown in the correct position in Figure 7-1.

2.Install the Translation Card in the TN777B network control circuit pack. Insert the card into the slot in the direction indicated by the arrow on the card’s label as shown in Figure 7-1.

2

1

CardMemory

Definity

3

Figure Notes:

1.Insert card in direction of arrow into the slot.

2.Slot on TN777B circuit pack

3.Write switch positioned correctly

Figure 7-1. Write Switch on DEFINITY Memory Card

7-2September 1995 Issue 1