Save Translations
3.Move the cursor by pressing TAB to move down the screen from field to field and enter y in the Packet Bus Activated? field to indicate you have a TN778 circuit pack.
This is the only field needing change on this screen to turn the red lights off.
4.Press ENTER when the information is correct.
5.Verify the screen displays:
command successfully completed command:
Save Translations
The save translation command copies the current system translations onto the translation card. For
!CAUTION:
Do not attempt to save translations on the
The following procedure can be used to save system translations on the original card(s) and can also can be used to make a backup card or cards:
1.Verify the screen displays: command:
2.Type save translation and press ENTER.
3.After several minutes, the screen displays something like this:
September 1995 Issue 1
