Install Generic 3 Management Terminal
7
9
3
4
1 | 2 |
|
|
| 5 |
|
|
| |||
|
|
|
|
8
9
3
4
6 | 2 |
|
|
| 5 |
|
| ||||
|
|
Figure Notes:
1.TN786B Circuit Pack (Processor Board)
2.Rear Connection Panel “A” Ca rrier Position, labeled “TERMINAL” for unduplicated systems or “DUPLICATION OPTION TERMINAL” for duplicated systems.
3.In a
4.M25B Cable
5.Generic 3 Management Terminal
6.TN775 Circuit Pack (Maintenance Board)
7.Processor Port Network (PPN)
8.Expansion Port Network (EPN)
9.Distance between units not to exceed 50 feet (18 meters)
Figure 6-2. Direct Connections to Generic 3-Management
Terminal (G3-MT) and Electronic Industries
Association (EIA) Ground Isolator
5.Connect the keyboard cord to the KBD jack on the terminal.
6.If ordered, connect the optional printer to the appropriate place at the back of the terminal. Connect a parallel printer to the printer or PAR port or a serial printer to the Data Communication Equipment (DCE) port.
