Test Duplicated Switch Processing Element (SPE)
Interchange
status system |
|
|
|
|
| SPE A | |||
|
|
| SYSTEM STATUS CABINET | 1 |
|
|
| ||
|
|
| SELECT | SPE ALARMS | TONE/ | SERVICE SYSTEM | SYSTEM | ||
SPE | MODE |
| SWITCH | MAJOR MINOR | CLOCK | STATE | CLOCK | TONE | |
1A | active |
| auto | 1 | 0 | 1A | in | standby standby | |
1B | maint/init | auto | 1 | 0 | 1B | in | active | active | |
| SERVICE | CONTROL | DEDICATED |
| SERVICE | BUS ALARMS | BUS | OPEN BUS | |
TDM | STATE | CHANNEL | TONES | PKT | STATE | MAJOR MINOR | FAULTS | LEADS | |
1A | in | y | n | 1 |
|
|
|
|
|
1B | in | n | y |
|
|
|
|
|
|
EMERGENCY | SELECT |
|
| SERVICE |
|
| CABINET |
| |
TRANSFER | SWITCH |
| STATE | MODE |
| TYPE |
| ||
1A |
| in | standby | MCC |
| ||||
1B |
| in | active |
|
|
| |||
|
|
| - |
|
|
|
|
|
|
|
|
| - |
|
|
|
|
|
|
Command successfully completed
Command:
Screen 8-12. Example System Status Report for All Cabinets
4.Note the MODE of SPE 1A and 1B.
5.Type refresh spe and press ENTER.
Command successfully completed should be displayed.
6.Type reset system interchange and press ENTER. This causes the terminal to log off.
7.Log in as craft again. See Chapter 7, "Activate the System" for more information. Remember to use the new password established for craft.
8.Type status system cabinets-all and press ENTER.
9.A screen similar to the following should be displayed:
Issue 1 September 1995
