
Activate the System
TN786 FLMM Release | 1.8.0 |
|
INVOKING EMERGENCY | TRANSFER |
|
ROM CHECKSUM TEST | ( = 9CAE ) | PASSED |
SOFT INT TEST |
| PASSED |
NMI TEST |
| PASSED |
READ_WRITE MEMORY |
| PASSED |
MEMORY BOARD 1 PARITY BIT TEST | PASSED | |
MEMORY FUNCTIONAL | TEST | PASSED |
FLASH TEXT CHECKSUM ( = EF3E ) | PASSED | |
RESET 4 (REBOOT) PERFORMED |
|
Screen
2.About 2 minutes after REBOOT PERFORMED is displayed, verify the terminal screen displays:
Login:
NOTE:
Most red lights will come on and go off again at this point. Some red lights will stay on until the country options are administered in the next pages.
Introduction to Terminal Screens and
Commands
Screens
The system is administered using screens displayed on the terminal. The screens are used to add, change, display, list data, and to remove system and telephone features. To access a screen, enter a valid system command in response to the command: prompt.