Activate the System

save translation

 

SPE A

 

SAVE TRANSLATION

 

Processor

Command Completion Status

Error Code

SPE_A

Success

0

SPE_B

Success

0

Command successfully completed command:

Screen 7-5. Typical Save Translation Screen

4.Verify a 0 is displayed in the Error Code column for each switch processing element in the system. A 0 indicates the save translation was successfully completed for the translation card. If a 0 did not appear, the save translation did not complete. Record the ‘‘error code number’’ and the ‘‘error message’’ and notify your AT&T representative.

5.Remove the original translation card(s) from the TN777B(s) and replace it or them with backup card(s).

6.Repeat Steps 1 through 4 for the backup card(s).

7.Remove the backup translation card(s) from the TN777B and replace it or them with the original translation card(s).

8.Label the backup card(s) with the date and time of the backup. A special notation should be put on the cards to clearly distinguish them from other such devices.

9.Store the backup in a secure place.

7-16September 1995 Issue 1

Page 108
Image 108
AT&T 555-230-894 manual Screen 7-5. Typical Save Translation Screen