Remotely Connect Generic 3 Management Terminal
Remotely Connect Generic 3
Management Terminal (G3-MT)
A secondary (and optional) terminal used for purposes other than maintenance can be installed at some distance from the switch. Typical remote connections are shown in the schematic in Figure
1 | 2 |
| 4 |
| 3 |
| |
|
| 5 | |
|
|
| |
13 |
|
|
|
9 | 3 | 5 |
4 |
6 | 16 | 11 |
|
| 10 |
| 7 | 8 |
| 5 | 9 |
| 14 | 3 |
15 | 13 |
12
Figure Notes:
1.External modem pool
2.7400A data module
3.Line Cord
4.Cross Connect Field
5.B25A Cable
6.TN754 Circuit Pack
7.Public Network
8.103A or Modular Wall Jack
9.Modem
10.When a DB9 is used on the back of a personal computer (PC), use
11.Call Detail Recording Utility, CAS+, Property Management System, Basic Call Management System, Remote Management Terminal, System Journal Printers, Cost Allocator
12.Remote Management Terminal or Monitor 1
13.M25A Cable
14.This circuit pack can be any of the following: TN747, TN753, TN760, TN767, TN464, TN2147, TN465, etc.
15.This circuit pack can be any analog circuit pack: TN769, TN742, TN746, TN2183 etc.
16.DEFINITY System Generic 3 switch
Figure 6-4. Typical Remote Connections from Generic 3 Across Public Network to Terminal and Other Remote Devices
Issue 1 September 1995
