AT&T 555-230-894 manual Unavail

Test the System

status system	all-cabinets				SPE B
		SYSTEM STATUS	CABINET 1
EMERGENCY	SELECT		SERVICE		CABINET
TRANSFER	SWITCH	EXP-LINK	STATE	MODE	TYPE
1A	unavail	01A01-02A01	in	standby	MCC
1B	auto-on	01B01-02B02	in	active
		-
		-

Command successfully completed

Command:

Screen 8-16. Example of System Status before Expansion Link is Set

3.Type set expansion-link xxxx where xxxx is the either one of the cabinet, carrier, and port (see note on page 8-1)locations of the standby expansion link.

4.Verify the screen displays:

Command successfully completed Command:

5.Type status system all-cabinets and press ENTER.

8-18Issue 1 September 1995