Test Telephones and Other

10

Equipment

 

This chapter describes how to test the telephones and other equipment. The following tests are included in this chapter:

1.Make test calls (single-cabinet switch)

2.Make test calls (two-cabinet switch)

3.Make test calls (three-cabinet switch)

4.Test the attendant console

5.Test the selector console

6.Test External Ringing

7.Test Queue Warning Indicator

8.Test Integrated Announcement

9.Test Music-on-Hold

10.Test Emergency Transfer

11.Test remote access interface (known as Initialization and Administration System (INADS))

12.Test Basic Rate Interface (BRI)

NOTE:

The tests in this chapter are performed after the equipment has been wired to the switch and after the customer’s data for that equipment has been administered.

For easier reference, installation steps and test steps are grouped in separate chapters. It may be more efficient to install each hardware component, administer it, and then test it before going on to install another component. As an example, install the attendant console using the procedures in Chapter 9, "Install

Issue 1 September 1995 10-1

Page 197
Image 197
AT&T 555-230-894 manual Test Telephones and Other Equipment