AT&T 555-230-894 manual Data

Connect Generic 3 Management Terminal (G3-MT)

7.Connect AC power cord of the terminal to the selected AC receptacle in the equipment room and turn on the terminal.

	DATA		DUPLICATION
PROCESSOR	COMMUNICATIONS		OPTION
INTERFACE	EQUIPMENT	TERMINAL	TERMINAL

	DATA		DUPLICATION
PROCESSOR	COMMUNICATIONS		OPTION
INTERFACE	EQUIPMENT	TERMINAL	TERMINAL

Figure 6-3. Duplication Optional Terminal and Terminal

Connectors on the Control Cabinets

Figure 6-3shows the two possible positions on the back of the switch control cabinet for connecting the M25B cord between the switch and the terminal; or, for DC powered systems and for electromagnetic shielding, for installing the 116A Electronic Industries Association (EIA) Ground Isolator: the DUPLICATION OPTION TERMINAL connector for high and critical reliability (duplicated) systems in the top illustration and the TERMINAL connector for standard reliability (unduplicated) systems in the bottom illustration.

Issue 1 September 1995 6-5