AT&T 555-230-894 manual Install Initialization Administration System Inads Interface

Install Initialization and Administration System (INADS)

Interface

Install Initialization and

Administration System (INADS)

Interface

The Initialization and Administration System (INADS) provides a 1200 Bits Per Second (bps) modem connection for the remote management terminal for DEFINITY System Generic 3.

Figure 9-9shows a typical Initialization and Administration System (INADS) installation, where the analog port is connected from the switch directly to the connectors on the auxiliary cable pins.

G3

T

R

1

2

4

3

Figure Notes:

1.Initialization and Administration System (INADS) interface on AUX connector (see Table 9-6 on page 9-10)

2.Auxiliary cable

3.External analog Central Office (CO) trunk

4.Cross-connect field

Figure 9-9. Analog Port Connection

As an alternative, Figure 9-10illustrates a switched connection to the Initialization and Administration System (INADS) interface.

Issue 1 September 1995 9-21