AT&T 555-230-894 manual

Analog Tie Trunk Example

3.Choose a port circuit on the port circuit pack (such as Port 02).

4.Set option switches on the port board (TN760 tie trunk) as described in Appendix H, "Option Switch Settings".

5.Install cross-connect jumpers to connect the named pinouts from the tie trunk circuit pack to the appropriate leads on the external Tie Trunk. Names of the Tie Trunk leads must be determined from the manufacturer or supplier of the external trunk circuit. The example in Figure 9-5and Table 9-4shows a DEFINITY System Tie trunk connected to a DEFINITY System tie trunk. For tie trunk TN760, refer to Table 9-8and Table 9-9.

6.Administer on the Trunk Group Screen of the terminal. See the DEFINITY G3 Implementation Guide for more details.

The wiring designations for this example are listed in Table 9-4and are illustrated in Figure 9-5.

Table 9-4. Analog Tie Trunk Wiring Designations (TN760)

External Trunk or Adapter		TN760, Position 1C05
Pin	Port 1 Name	Port 2 Name	Pin
26	T1	T12	30
1	R1	R12	5
27	T11	T2	29
2	R11	R2	4
28	E1	M2	6
3	M1	E2	31

The following diagram illustrates these wiring designations.

Issue 1 September 1995 9-7