Change Craft Password

Alarms will appear in the Alarm Log when power is applied to the system before all equipment connecting to port circuit packs is installed. Normally, some alarms will be logged when power is applied to the system, but should be resolved quickly. If no equipment is connected to the port circuit packs, alarms associated with these ports can take up to four hours to log, but will clear automatically after all equipment is installed and operating correctly.

Change Craft Password

The password for the craft login must be changed by the installing technician to prevent unauthorized administration changes.

!CAUTION:

After the ‘‘craft’’ password ischanged, the new password must be safeguarded so no unauthorized administration changes can be made. This password MUST NOT BE REVEALED to the customer or to any unauthorized person.

Passwords are changed using the Change Password Screen (see Screen 7-2).To change the ‘‘craft’’ password,perform the following.

1.Verify the screen displays: command:

2.Type change password craft. Press ENTER.

September 1995 Issue 1 7-9

Page 101
Image 101
AT&T 555-230-894 manual Change Craft Password, Type change password craft. Press Enter