AT&T 555-230-894 manual Test Tone-Clock for each Expansion Port Network EPN

Test the System

test tdm port-network 2				SPE B
		TEST RESULTS
Port	Maintenance Name	Alt. Name Test No. Result		Error Code
PN 02A	TDM-BUS	294	PASS
PN 02A	TDM-BUS	296	PASS
PN 02A	TDM-BUS	297	ABORT	1005
PN 02B	TDM-BUS	294	PASS
PN 02B	TDM-BUS	296	ABORT	1005
PN 02B	TDM-BUS	297	PASS

Command successfully completed

Command:

Screen 8-15. Example Test Results for Time Division Multiplexing (TDM) Port Network 2

4.If Result is FAIL for any test, check the connectors of the Time Division Multiplexing (TDM) bus cables in Processor Port Network (PPN) 2.

5.Repeat these steps for each Expansion Port Network (EPN) to check the Time Division Multiplexing (TDM) bus cables.

Test Tone-Clock for each Expansion

Port Network (EPN)

Check each Tone-Clock for each Expansion Port Network (EPN) in the system.

1.Verify the screen displays: command:

2.Type test tone-clock 2A where 2A is the cabinet (see note on page 8-1)and carrier number for one of the Tone-Clocks installed, and press ENTER.

If any Result is FAIL, check the associated time division multiplexing bus cables and intercabinet cables in the Expansion Port Network.

3.Repeat Step 2 for each installed Tone-Clock board.

8-16Issue 1 September 1995