
Set Date and Time
Set Date and Time
The system date and time are set using the Set Date and Time Screen (see Screen
1.Verify the screen displays: command:
2.Type set time. Then press ENTER.
3.Verify the screen displays Set Date and Time Screen (shown below). Cursor is positioned on Day of the Week: field.
set time | Page 1 of 1 |
DATE AND TIME |
|
DATE |
|
Day of the Week: _________ | Month: __________ |
Day of the Month: __ | Year: ____ |
TIME |
|
Hour: __ | Second: xx |
Minute: __ |
|
Screen 7-3. Typical Date and Time Screen
4.Type day of week in English (Sunday through Saturday) and press TAB to move to next field. See Table
September 1995 Issue 1