P 20/ 25
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-9. Motor of Dust extraction system DX01, DX02
Note: Special repairing tool and Lubricant are not required.
DISASSEMBLING
(1)Separate Housing R and eight 4x18 Tapping screws from Housing L.
(2)Remove Baffle plate, Filter plate, Sponge sheet C and Motor complete as an assembled part. (Fig. 65)
Fig. 65
Motor complete | Baffle plate |
Sponge sheet C
Baffle plate
Note: Replacing Fan separately is not allowed.
ASSEMBLING
Assemble the components by reversing the disassembly procedure.
Guide plate, Cushion and four Rubber pins 4 are on not only Housing R but also Housing L, and therefore, be careful not to drop their parts.
Fig. 66
Guide plate
Rack B
Cushion
Rubber pin 4 (4 pcs. on this side)
Earth rubber
